Eagle-America Coping Sled



     

This sled is a nice implementation of a very similar sled used by Bob Rosendahl of The Router Workshop. I built one like it and find it a very good design and quite useful for coping rails and other table routing processes.

At one time Eagle-America only had two models; The Original and the Pro Model (left above). They have since expanded their line and it now appears (as of Episode 1713) that Norm is using either the 2100 or 3000 model—they are hard (if not impossible) to tell apart (left below). He removed the front block for his use.

Appearances: Episodes 1602, 1604, 1713, 1801, 1907


Last updated: 9 April 2007